Home Products Most Popular Contact
No items in your cart.
The page below is a sample from the LabCE course . Access the complete course and earn ASCLS P.A.C.E.-approved continuing education credits by subscribing online.

Learn more about (online CE course) »
This version of the course is no longer available.

PAS with diastase; liver

Periodic Acid-Schiff (PAS) with Diastase: Staining Protocol

Sample type required: Deparaffinized and re-hydrated tissue sections on positively charged slides.

Fixative: 10% NBF




Technical Notes


Malt diastase solution

1 hour at 37° C

Solution should be preheated to 37° C.

Do not heat the solution above 40° C, as enzyme activity can destroyed at higher temperatures.

Insufficient heat may cause incomplete digestion of glycogen.


Distilled water 3 changes Rinse slides gently to remove diastase.


Periodic acid:

0.5% solution

5 minutes


Distilled water

3 changes


Schiff reagent

15 minutes

Gluteraldehyde should be avoided as a tissue fixative since it is a dialdehyde that will react with this reagent and give false-positive PAS staining.


Potassium metabisulfite:

0.55% solution

1 minute in 2 changes

While some technicians omit this reagent step in the protocol with no problems, metabisulfite rinses may be necessary to remove any excess leucofuchsin left over after exposure to the Schiff reagent. Highly chlorinated water can cause these excess molecules to nonspecifically stain other tissue elements in the section.


Running tap water

Up to 10 minutes

Warm to hot running water develops the PAS stain and gives a more intense staining reaction than cold water.

Expected results:

  • Glycogen will be absent from tissue section

    The following elements will show positive PAS (rose red) staining:
    • Neutral mucins
    • Some epithelial mucins
    • Basement membranes
    • Fungal walls

Post staining procedure:

  • Tissue sections must be counterstained to fully recognize the presence of PAS positive staining. This can be achieved with the use of  hematoxylin (see separate page for specific guidelines).
  • After counterstain, tissue sections should be rinsed well in distilled water, dehydrated with 95% alcohol, followed by 100% alcohols, cleared with xylene (or xylene substitute), and cover-slipped.